Main Office (714) 922-1134

1574 N Batavia St, Ste 1 Orange, CA 92867

7 - 5 PSTMonday - Friday

Intermec CK71 Ultra-Rugged Mobile Computers


Sharing is caringShare on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInPrint this pageEmail this to someone
To Buy or See Price, visit our E-Commerce store
BarcodeSavings.com
Intermec CK71 Ultra-Rugged Handheld Computer Photo
The Intermec CK71 mobile computer features an ergonomically friendly design, making it easy for your workers to use. The Intermec CK71 is also rugged enough for industrial environments and has the ability to read both 1D and 2D bar codes. The built-in dual band 802.11n radio means the Intermec CK71 can also fulfill your wireless needs.

Intermec CK71 handheld computers are 31 percent smaller and lighter that other rugged devices in the same class. The Intermec CK71 is also equipped with the fastest and farthest imaging engines in the industry, providing unparalleled motion tolerance and an expansive barcode read range. The state-of-the-art power and battery technologies reduce the need to replace batteries and offer extended life for greater worker productivity.

• 31% smaller and lighter than leading devices in the ultra rugged class
• Superior computing performance and application response time
• Industry’s fastest and farthest imaging engines delivering superior motion tolerance and barcode read range
• Exceptional peripheral support and quick change snap-on accessories provide versatility for every distribution environment
• On-board diagnostics and INcontrol Managed Services provide device health visibility
• Advanced power and battery management technologies extend device run time and reduce expense of replacement batteries
• Dual-band 802.11n radio for pervasive wireless coverage
• Non-Incendive option for hazardous locations CK71

Display

• 8.9cm (3.5in) Transmissive VGA
• 480 x 640 pixels
• 65,536 (16 bit RGB) Colors
• High-Durability Touch Screen
• LED Backlight
• Ambient Light Sensor

Environment

Drop Survival: 2.4 m (8ft.) to concrete per MIL-STD 810G, 1.8m (6 ft) to concrete across operating temperature range per MIL-STD 810G 2,000 (1m) tumbles per IEC 60068-2-32 specification
Electrostatic Discharge: +/- 15 kV air discharge; +/- 8 kV direct discharge
Humidity: Relative Humidity: Non-condensing, 95%
Operating Temperature: -20° C to +60° C (-4° F to +140° F)*
Transitory Exposures to -30C
Recharging Temperature: +5° C to +35° C (41° F to 95° F)
Storage Temperature: -30° C to +70° C (-22° F to +158° F)
Environmental Protection: Rain & Dust Resistance: IP67
Non-Incendive Version: Products in the 70 Series family with NI certification comply with the following:
Suitable for use in Division 2 locations
• Safety: cULus Listing – ISA/ANSI 12.12.01
• Gases: Class I – Groups A, B, C, D
• Dusts: Class II – Groups F, G
• Fibers and flyings: Class III

Keypad

• Numeric with function keys
• Alphanumeric
• Both keypad options feature hard keycaps with laser-etched legends.

Memory and Storage

Flash ROM: 1 GB Flash (800 MB available)
Memory/Storage Extensions: Customer-accessible micro-SD slot for removable memory cards up to 32 GB
RAM Memory: 512 MB RAM (384 MB available)

Microprocessor

Multi-Processor Architecture: Texas Instruments® 600MHz or 1 GHz multi-engine processor architecture

Operating System

Microsoft Windows Embedded Handheld built on Windows 6.5.3 technology
(Getting started information: www.windowsmobile.com/getstarted)

Physical Characteristics

Height: 5.0 cm (1.98 in)
Length: 23.7 cm (9.33 in)
Width: 8.0 cm (3.16 in); grip area 6.42cm (2.53 in)
Weight: 584 g (19.75 oz) with battery

Power

Battery Capacity: 3.7 V, 5200 mAh
Battery Type/Supply: Li-Ion, removable, rechargeable

Software

Application Development: Intermec Developer Library: www.intermec.com/dev
Apps and Components:
• VERDEX (Imaging-based data extraction and verification)
• eMDI (Mobile Document Imaging)
• Intermec Client Pack (Terminal Emulator/Browser)
Data Management: Skynax® Mobile Communications
Smart Systems Support:
Device Management: Intermec SmartSystems™ support includes ScanNGo provisioning for use alone or with device management software from Intermec ISVs
Device Health Monitoring: Remote access requires SmartSystem Management option




Request Demo
Service Contract
For More Information
Contact Us
Phone: (714)922-1134
Or Have Us Contact You
Please fill out the form below: